Home :: All Products :: Acoustic Seals

Shop Our Store

Door Seal Kit

List Price	$44.98
Your Price	$36.99
You Save	$7.99 - 18%

Qty

With an Audimute Door Seal Kit, it's never been easier to block sound from entering or exiting your room. Simply adhere the Acoustic Door Seals to the top and sides of your door, followed by an Adhesive Door Sweep on the bottom. An Audimute Door Seal Kit works by creating an airtight space so that sound cannot freely travel through one of the weakest parts of the room.

A Door Seal Kit includes:

(1) roll of one-sided, self-adhesive Acoustic Door Seal tape (3/16"x1/2"x50' )
(1) roll of one-sided, self-adhesive Door Sweep tape (1/2"x1.5"x25')

Both rolls are made out of strong, resilient foam. Audimute Door Seal Kit treats 1-3 doors. A quick-fix solution for homes, apartments, studios, vocal booths and more, an Audimute Door Seal Kit is simple to adhere, following the guidelines below.

Instructions for Applying Acoustic Door Seals:

1. Measure the width and
height of your door. Cut
(3) strips of the Door
Acoustic Seal to size

(You'll need one for the
top of your door as well
as one for each side). &

2. Begin in the corner of
your door, on the INSIDE
of the frame - adhere
each Door Acoustic Seal
flush against the door
jamb (See NOTE below).
Peel off the paper
backing as you go.

(Helpful Hint: Open your
door a and stand on the
side towards which it
opens - you'll be facing
the inside of the door
frame).

NOTE: On the hinge side
of the door, the acoustic
seal should be adhered
NEXT to the door jamb,
directly on the frame
(see picture to the left).

On the opposite side, the
Door Acoustic Seal
should be adhered
directly ON TOP of the
door jamb (see picture to
the right.

3. Once the Acoustic Door
Seals have been
attached, run a flashlight
test to ensure that no
gaps remain. Simply
shine a light through the
top and sides of your
door.

If light shines through,
you may want add
another layer of the Door
Acoustic Seal because
this means there is still
air space between the
door and frame where
sound can travel.

Instructions for Applying Audimute Adhesive Door Sweep:

Measure the width of the bottom of you doors
Cut to size one (1) strip of the Audimute Adhesive Door Sweep for each door in your space
Apply the Adhesive Door Sweep to the bottom of your door on whichever side you prefer, covering as much of the gap as possible (Note: Door sweeps only need to be applied to one side of the door)
Peel off the paper backing once adhesive door seal is applied
Be sure to adhere the door sweeps in a way that the door still swings open and closed with relative ease

Product Specifications - Acoustic Door Seal:

Density (lbs./cu. ft.) ASTM D-1667 8#
Hardness (Shore 00) ASTM D-2240 25
Force to Compress (psi) ASTM D-1667 3.5 @25% (kPa 24)
Compression Set 30% ASTM D-1667 5 (% loss from original height)
Peel Adhesion ASTM D-1000 2#
Water absorption GTP 1.0 (% by volume)
Tensile Strength (psi) ASTM D-412 30 (kPa 207)
Percent Elongation ASTM D-412 150
Thermal Conductivity ASTM C-518 0.27
Recommended Service Temperature -40°F to 180°F (-40°C to 80°C)
Recommended Application Temperature 50°F to 110°F (10°C to 45°C)
Fungi resistance - Excellent
Oxidation resistance - Excellent
Weather resistance - Excellent

Product Specifications - Adhesive Door Sweep:

Density (lbs./cu. ft.) ASTM D-1667 7#
Hardness (Shore 00) ASTM D-2240 14
Force to Compress (psi) ASTM D-1667 2.0 @25% kPa 14
Compression Set 30% ASTM D-1667 4 (% loss from original height)
Peel Adhesion ASTM D-1000 2#
Water absorption GTP 1.1 (% by volume)
Tensile Strength (psi) ASTM D-412 25 kPa 173
Percent Elongation ASTM D-412 150
Thermal Conductivity ASTM C-518 0.27
Recommended Service Temperature -40°F to 180°F (-40°C to 80°C)
Recommended Application Temperature 50°F to 110°F (10°C to 45°C)
Fungi resistance Excellent
Oxidation resistance Excellent

Item #: ASLK0000779

Customer Reviews

I just wanted to let you know that I am VERY impressed with your company thus far. I'll be sure to use your company in the future. Fast ship dates, a human voice when I call…truly great all around.

They were as described, easy to install and do block the sound as much as is possible given the doors in my apt. I think now I might still need acoustic panels to add to the soundproofing. -Buff K

we have only so far installed the door tape in our medical office, between exam rooms at the windows, and there has been a SIGNIFICANT reduction in sound between the rooms. Once we install the panels, we know it will improve even more, giving our patients the privacy they need. thank you for your great products!

Write A Review

Customers who purchased this item also purchased these items:

MegaClip Wall Hanging Clip

AHDMC000707

$2.50

Quick Hanging Knob and Wall Screw

AHDSK000112

$2.50

	1. Measure the width and height of your door. Cut (3) strips of the Door Acoustic Seal to size (You'll need one for the top of your door as well as one for each side).	&
	2. Begin in the corner of your door, on the INSIDE of the frame - adhere each Door Acoustic Seal flush against the door jamb (See NOTE below). Peel off the paper backing as you go. (Helpful Hint: Open your door a and stand on the side towards which it opens - you'll be facing the inside of the door frame).
	NOTE: On the hinge side of the door, the acoustic seal should be adhered NEXT to the door jamb, directly on the frame (see picture to the left). On the opposite side, the Door Acoustic Seal should be adhered directly ON TOP of the door jamb (see picture to the right.
	3. Once the Acoustic Door Seals have been attached, run a flashlight test to ensure that no gaps remain. Simply shine a light through the top and sides of your door. If light shines through, you may want add another layer of the Door Acoustic Seal because this means there is still air space between the door and frame where sound can travel.

Search

Shop Our Store

Door Seal Kit

Customer Reviews

Customers who purchased this item also purchased these items: