Our Quick Hanging Knob and Wall Screw solution is a simple, sturdy, and attractive way for hanging anything with grommets, eyelets, loops, or hanging features.
In spaces where a simple nail or screw is not good enough, or where an item will be hung, removed, and re-hung often over time, consider our Hanging Knob and Wall Screw solution when displaying heavy canvas prints, tapestries, art work, posters, clothing, fabrics, sound proofing material, and more.
Perfect for a more finished look in semi-permanent installations, each knob is installed quickly using common household tools. We recommend this hanging solution for absorption sheets and other heavier wall hangings in spaces where the unfinished look of exposed nails or screws is not desired, and when items will be hung and/or re-hung in exactly the same location on many occasions. This knob and wall screw hanging solution will retain its
original positioning and strength after repeated use when installed correctly. Simply turn
the knob to loosen or secure it to the threaded bolt.
Each hanging nob and wall screw comes in 3 pieces: knob, threaded bolt, and anchor.
Each threaded bolt is sized at 10-24 x 1.25" (10 mm in diameter with a thread size of 24 with a length of 1.25 inches). Each knob is approximately 1 inch in diameter with a 10-24 blind insert. Anchors require a .25 inch pilot hole. How to install the knobs:
1) Attach the knob by hand twisting it onto the flat end of the threaded bolt (included)
2) Place the plastic anchor (included) in the installation surface if needed (recommended when hanging in dry wall, wall board, or similar wall/ceiling surfaces), pre-drilling a .25 inch pilot hole.
3) Screw the pointed end of the threaded bolt into the anchor or installation surface.
4) Grasp the bolt lightly with pliers (recommended to hold the bolt in place the first time) and loosen the knob by twisting counter-clockwise.
Check out our absorption sheets for a quick look at how the knobs are used to hang our products with grommets.